iot4-0521-01 (16 analog input 0-20ma)

The board consists of the mcu-ESP8266 module and 4 modules with ADS1015 for the A / D conversion of the 16 inputs. The chip shown converts the analog size to 11 bits + sign. By inserting in parallel to the inputs 100 ohm resistors e program the PGA to a gain of 2 there are current inputs (0-20mA). If 100k resistors are used on the PCB, we get a multichannel voltmeter with inputs at voltages below the 3 volt supply of the chip. But by means of resistances of the dividers provided on the PCB the voltages can be higher. If you need more precision you can use the modules with ADS1115 which offer a resolution of 15bit + sign. The values ​​of the inputs are shown locally on the display. Values ​​that are sent from the esp8266 MCU via WiFi to the remote server connected to the network.



Jan 24,2022
68 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Giovanni Del Fante View Profile
6posts 1followers 2following
  • Comments(0)
  • Likes(1)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    Unfortunately, there was a misunderstanding when checking the component placement. I had understood the marking of the LED with plus and minus differently, namely anode = plus and cathode = minus. ...
    Custom onewheel pint x battery box. Excellent print and material build. Great customer service. Exact fitment for project. Will use for future projects
    Properly manufactured and good quality PCB, all the component placement was okay and properly soldered.
    Very impressed with the build quality. The fasteners fit like a glove into the threads and countersinks. The plate is even smoother than I expected. It does have visible milling marks (as expected)...
    Great quality & fast delivery
    Quantity 5 fairly simple 2 layer PCBAs, largely surface mount. Designed to take an ESP32 Pico Dev Kit attachment and used for test fixturing. PCBWay did a great job on these boards. During the proc...
    This is a replacement mainplate for the extruder in the Prusa Mk3.9/Mk4 printers, this item has been shown to wear with extensive filament changes. So I wanted a version that would not be as liable to...
    First time ordering av PCB and it turned out really good. It's an adater to adapt a PS2 mouse to old Amiga's, C64, C128 computer from the 80's. And it's also can adapt the old 8 bit NES controller to ...
    SHOW ME MORE