TTC_v2

ESP32 with 24VDC/3.3VDC converter, M12 connectors, external onboard ADC, OLED display and status LEDs. So far, everything I tested is working as expected. Solder joints are well done, SMD as well as the thruhole parts. Flashing the ESP32 worked like a charm, OLED display, LEDs and Bluetooth communication all up and running.





Mar 23,2021
681 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Daniel Reck View Profile
2posts 0followers 0following
  • Comments(0)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    perfect
    Excelente trabajo, muchas gracias!
    I had this made for my Schecter Sun Valley, but should replace any cover 140x87mm around 2.15mm thick. It turned out way better than I could've imagined, fantastic! :)
    The camera badge is a wearable art piece which has very detailed silk and copper work that PCBWay did an awesome job on. This is why PCBWay is my preferred manufacturer for all my #badgelife projects...
    The boards were produced rapidly and arrived to me in no time. Tolerances are all great. No burrs or defects on the board. I used rather small traces and drills as well as curved traces, but this was ...
    Excelente trabajo, muchas gracias!
    The PCB serves as a connection host between a raspberry pi and two illuminated physical switches. Apart from making the connection, the board hosts current limiting resistors for the LEDs as well as l...
    Great quality
    SHOW ME MORE