Servo bracket

These were two servo brackets to use where bent steel ones would not work. The STL I provided was checked and engineering suggestions made. Even after some modifications, I had to accept their warning about some thin walls but was happy to proceed. The parts have been printed and delivered exactly as per the drawings, with no faults or issues. I could not be happier with the parts and with the care taken during the ordering process.

Oct 17,2026
28 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Engineer View Profile
1posts 0followers 0following
  • Comments(0)
  • Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    circuit board for controlling the motors in a go baby go car with a joystick
    Delivered fast, great product and excellent customer service
    PCBway made rapid prototyping incredibly easy and straight forward to do, I have the first couple test boards in systems now testing and am working on the second revision to shrink the board and compo...
    Excelente trabajo, entrega a tiempo y siempre estuve bien informado del estado del pedido. Muchas gracias.
    Working very well for the application. This technology has enabled a novel design in the field of micro convection heaters. Parts were very clean on arrival, and printing quality was better than expec...
    Aluminium print accuracy is good, easier to sand than stainless steel. Polished surface is faster to achieve and as good as steel.
    I was genuinely astonished by the manufacturing quality of this custom aluminium rear panel. Seeing the finished part in person exceeded my expectations and was a real highlight of my first PCBWay ord...
    We ordered a 4-layer PCB with a red solder mask, a milled outline, and a single PCB per panel. The break-away rails were designed with an increased width of 10 mm to meet our requirements. What really...
    SHOW ME MORE