SP-247: RTU through WiFi

The SP-247 is an RTU (remote terminal unit) that communicates via WiFi either with a control center where a SCADA application is running or with an Android App to make direct reading of the variables. It also has RTC (real time clock) and a flash memory to record events and data that allow a subsequent analysis to determine causes in case of failures of the controlled equipment. Additionally it has a relay output, free of potential, and a digital input (on / off) to implement some kind of additional logic if necessary. Thanks PCBWay for the total quality of always ..! I know that I count on you for my projects ..


Jan 05,2019
1,865 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Carlos Gramaglia View Profile
30posts 3followers 3following
  • Comments(1)
  • Likes(2)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    perfect
    Excelente trabajo, muchas gracias!
    I had this made for my Schecter Sun Valley, but should replace any cover 140x87mm around 2.15mm thick. It turned out way better than I could've imagined, fantastic! :)
    The camera badge is a wearable art piece which has very detailed silk and copper work that PCBWay did an awesome job on. This is why PCBWay is my preferred manufacturer for all my #badgelife projects...
    The boards were produced rapidly and arrived to me in no time. Tolerances are all great. No burrs or defects on the board. I used rather small traces and drills as well as curved traces, but this was ...
    Excelente trabajo, muchas gracias!
    The PCB serves as a connection host between a raspberry pi and two illuminated physical switches. Apart from making the connection, the board hosts current limiting resistors for the LEDs as well as l...
    Great quality
    SHOW ME MORE