Rear panel pre-milling protoype

Companion rear panel to the above, printed in PETG ahead of aluminium milling. Same excellent result. Accurate enough to validate cutouts and hole positions against real hardware and to catch drawing issues before committing to metal. This prototype-then-machine route works very well with PCBWay and I will keep using it.

Sep 08,2026
10 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Andy Lord View Profile
13posts 0followers 0following
  • Comments(0)
  • Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    My aim was to create a simple (no vacuum tube version) of the Usagi Electric bunny for my own personal use, PCBWay reviewed my initial order and provided important feedback so I could revise the orde...
    Working well for my application, the dimensions were very accurate. There was a slight amount of support material stuck in some of the internal holes, but I was able to remove this with a drill. The s...
    Fast process,Fast Delivery, Good Packing, High Quality.
    Received boards were 100% Functional
    THT pcb for a fuzz guitar pedal. My experience with Riley Zhu and PCBWay has been stellar. Exceeded all my expectations.
    Very pleased with the service and part. Took a bit longer than estimated but was told they had to scrap the first part and remachine which is a positive thing ultimately as opposed to receiving a bad ...
    Wonderful work on this PCB. This was my first submission of Gerbers and instructions to have a custome manufactured pcb. This minibadge was created with superior products, services, and artisan craf...
    This is a Custom Programmer made to Program ESP32 and other Microcontrollers
    SHOW ME MORE