Pawl

Bell 47G2 helicopter pedal adjustment pawl. Single piece 9.5mm dia. 304 stainless. Two angled teeth cut into base and a single centred hole at the top end to be tapped for attachment to the pedals. I probably should have made the hole quite a bit larger to accept a threaded sleeve. That would have saved me the tapping. This was designed for a flight simulator. The finished product exceeded my expectations and I'm very happy with the result. Thanks

Jun 28,2023
63 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Stuart Lawless View Profile
2posts 0followers 0following
  • Comments(0)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    nice pcb thanks everyone.
    Very good PCBA quality. All 5 pcba pcbs are working with not issues. Extra care was done by adding more solder for the USB C anchors.
    Great PCBs, did exactly what I needed. Got the first PicoZX up and running very quickly. The PCBs were perfect quality, I'm very happy with my order and am already thinking about what project to do ne...
    Nice feature of multi-color PCB
    On time, no issues. The final product tested out fine, I built 10 boards and all worked great.
    This was a difficult part to fabricate (small mesh and bends near the mesh) the part is (as expected) a little bit out of shape because of the heat during production but that will be fixed as soon as ...
    Perfect as usual
    This is my third order of PCBs for my single board computer projects. Excellent quality of PCB manufacturing, fast delivery, user-friendly website with excellent navigation and a selection of options ...
    SHOW ME MORE