MyTrackr

MyTrackr is an Arduino-Based GPS tracker, with free and open source software and open hardware. This project has been my goal for a while. I picked up EDA software in order to be able to design a stand-alone board that could easily fit my backpack or even my pocket. So this was the first PCB I ever designed. I admit I chose PCBWay because its base service is very cheap, and since I had no idea if my boards would be working or not, because of my inexperience with PCB designing, so if it wouldn't work, it wouldn't be a big loss. Since the service is cheap, I didn't expect much, so I was totally astonished when I finally saw the boards: they are awesome! Everything is precise and very detailed, even the silskcreen is perfectly aligned! The boards are solid, and don't leave anything to be desired. They are also precisely cut, which is particularly important, because some of my traces run very close to the edges. Some parts of the silkscreen are also close to the edges and they were rendered precisely as well. So, all in all I'm very satisfied with PCBWay's service, I will surely use it for all of my PCB needs. Actually I have just submitted a new order for three different boards ;).