LED carrier board

This project had been a small carrier board for some higher power LEDs to sidepump an Nd:YAG rod. This had been my first Aluminum PCB so I made some design mistakes (not enough spacing between traces and drilled holes, etc.). A quick mail with PCBWay immediatly resolved the problem in a fast and simple way. The PCBs are high quality - as expected - and are manufactured exactly to specification. As usual everything with PCBWay works flawlessly and perfect. In my opinion PCBWay is still the best source for PCBs (including more exotic materials for the hobby-electronics sector like Rogers for RF boards or Aluminum as well as multilayer_ boards)

Mar 15,2023
42 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Thomas Spielauer View Profile
6posts 0followers 0following
  • Comments(0)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    Unfortunately, there was a misunderstanding when checking the component placement. I had understood the marking of the LED with plus and minus differently, namely anode = plus and cathode = minus. ...
    Custom onewheel pint x battery box. Excellent print and material build. Great customer service. Exact fitment for project. Will use for future projects
    Properly manufactured and good quality PCB, all the component placement was okay and properly soldered.
    Very impressed with the build quality. The fasteners fit like a glove into the threads and countersinks. The plate is even smoother than I expected. It does have visible milling marks (as expected)...
    Great quality & fast delivery
    Quantity 5 fairly simple 2 layer PCBAs, largely surface mount. Designed to take an ESP32 Pico Dev Kit attachment and used for test fixturing. PCBWay did a great job on these boards. During the proc...
    This is a replacement mainplate for the extruder in the Prusa Mk3.9/Mk4 printers, this item has been shown to wear with extensive filament changes. So I wanted a version that would not be as liable to...
    First time ordering av PCB and it turned out really good. It's an adater to adapt a PS2 mouse to old Amiga's, C64, C128 computer from the 80's. And it's also can adapt the old 8 bit NES controller to ...
    SHOW ME MORE