Guitar Pedal Efects PCB

Sending a PCB design File to manufacture is always a hard time, and even more difficult if is the first time you have designed a PCB file. But with PCBWay this process can't be easier !! Their complete quote form sheet is what we like about them. Easy to understand and to fill. Then we send the files, we got confirmation and we can see in time the updates on the fabrication. In a couple o days the PCB were made and ship. Very impressive !! Now I got them here with me and i can't be more impressed with the quality and the final product. We ordered a small batch for testing, but we are definitely ordering more. A great manufacturer for PCB boards !! Recommended


May 24,2017
206 viewsReport item
  • Comments(2)
  • Likes(1)
  • Thank you for purchasing PCBWay's and for your positive feedback. We love having you as part of the PCBWay's Community and look forward to making your experience a positive one. Hoping to receive your next orders soon! :)

    Reply
  • nice one !!! i make pedals too :)

    Reply

You might like

The quality of the PCBs is excellent and the delivery time has been much less than I expected. I have used these PCBs in a display that has the functions of clock, stopwatch and thermometer. My project: Design of a 7-segment SMD display, with serial control. With th is circuit you can stack as many digits in series as necessary, because the number of control pins doesn't change. In this circuit, the TPIC6B595 is a Shift Register, and a 74HC04 (6 inverters) is used as the 'driver / separator' of the control signals: Clock, Strobe and Enable. When using a shift register, the control signals (Clock, Strobe and Enable) are the same for all digits, and the Data line is connected to the first digit ... chaining the data output of one digit with the next. The design of this 7 segment display is modular, and you can connect as many digits in series as necessary. Each digit has its own 5V voltage regulator, but it is only necessary to install one to power the entire series. The connections of the output of a module are connected to the input of the next module, thus allowing to feed all the modules with a single voltage regulator. In order to avoid an excessive load of the control signals (Clock, Strobe and Enable) and to avoid possible interferences in the wiring, each module has a circuit that performs the functions of 'regenerator' of the signal. The integrated circuit 74HC04 has 6 inverters, and they are used in pairs, in order to obtain the same logic level of the input like output. The only detail to consider is that the connection of the 3 control signals with the shift register (TPIC6B595) are made at the outputs of the first inverter. In this way, the CPU should deliver the 3 control signals: Clock, Strobe and Enable in inverted mode.
x
mm
Earn a $5 Welcome Bonus