ESP32 Controller

This board is used to control a Raspberry Pi robot or any hobby robot using BLE as the communication protocol. The board was well built, delivery was prompt and everything worked the first time. I was able to control my Raspberry Pi robot just fine and I had issues uploading code to my ESP32 while it was mounted on the board. Great customer service and the boards shipped safely. I have tested the board with MicroPython using Thonny and it works without issue. I have tested it with an ESP32 Node32s.


Feb 03,2026
11 viewsReport item
  • Comments(0)
  • Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like