A short prototype board for the C64 expansion port. The boards are nicely made and the quality is amazing for the low price!
A small expander for the C64 expansion port. It gives you one extra connector to connect a cartridge to. The boards are nicely made and the quality is amazing for the low price!
A standard cartridge for the C64. The boards are nicely made and the quality is amazing for the low price!
Using WS2812 LEDs you can make a real party machine of a C64. It can also take input from the SID sound chip and create a light organ. The boards are nicely made and the quality is amazing for the lo...
This cartridge connects to the expansion port on the C64 and displays the current address and data which is on the address and data bus. With a button you can freeze the display. It is completely invi...
A very small board for one WS2812 RGB diode and connectors on each end.
A C64 adapter for the userport to connect two extra joysticks to, for 3-4 player games.
A replacement board for the LED board on a arcade stick. It replaces the original board with boring lights with WS2812 RGB diodes (they need to be mounted standing on their side!). The boards are nic...
A long prototype board for the C64 expansion port.
A small break out board the the C64 cassette port with place for connectors on the ends. The boards are nicely made and the quality is amazing for the low price!
This connects between the power supply and the C64 and monitors the voltage on the 5V line. If it gets too high, the voltage is cut off. It uses a MOSFET transistor which is much faster than a relay. ...
Using APA102 LEDs you can make a real party machine of a C64. It can also take input from the SID sound chip and create a light organ. The boards are nicely made and the quality is amazing for the lo...
An adapter board for a 4464 DRAM chip, which replaces 4 standard 4164 DRAM chips in a C64. With two of these boards you can replace all 8 of the 4164 DRAM chips in a standard C64. The boards are nice...
An arduino based controller for Kernal and Character ROM switching. Uses an OLED display and a rotary encoder with switch as user interface.
A small prototype board with space for a C64 cassette port connector on one side.
A standard prototype board for the Arduino Mega. The boards are nicely made and the quality is amazing for the low price!
1 ... 94 95 96 97 98 99 100 101 102 103 104 ...