A tiny board with three WS2812 RGB diodes on and connectors on each end. The boards are nicely made and the quality is amazing for the low price!
A tiny board with three WS2812 RGB diodes for use as chevron lights on a 3D printed Stargate Atlantis gate. The boards are nicely made and the quality is amazing for the low price!
A small prototype board with space for a cable mount 9-pin DSUB connector. The boards are nicely made and the quality is amazing for the low price!
A large prototype board with space for two cable mount 9-pin DSUB connectors. They are spaced to be able to connect directly into the joystick ports of a C64. The boards are nicely made and the quali...
An RF-module replacement for a C64 long board (PCB assy. 2502469). It has space for S-Video and audio connectors which use the holes in the case formerly used by the RF connector and channel switch. ...
A small prototype board with space for a C64 cassette port connector on one end. The boards are nicely made and the quality is amazing for the low price!
A SD-card adapter for use with an Acorn Atom micro computer from 1980. The boards are nicely made and the quality is amazing for the low price!
A prototype board for use with the Arduino Pro Mini. There were no prototype boards to find for this module so I made this. The boards are nicely made and the quality is amazing for the low price!
A tiny board with two WS2812 RGB diodes on and connectors on each end. The boards are nicely made and the quality is amazing for the low price!
A board which replaces the two configuration switches on a SIDFX dual SID C64 adapter with two small push buttons which can be hidden inside the C64. I found the original configuration switches hard t...
A small prototype board with space for a PCB mount 9-pin DSUB connector. The boards are nicely made and the quality is amazing for the low price!
A large prototype board with space for two PCB mounted 9-pin DSUB connectors. They are spaced to be able to connect directly into the joystick ports of a C64. The boards are nicely made and the quali...
An RF-module replacement for a C64 long board (PCB assy. 2502466 and older). It has space for S-Video and audio connectors which use the holes in the case formerly used by the RF connector and channel...
A large prototype board with space for a C64 cassette port connector on one end. The boards are nicely made and the quality is amazing for the low price!
A normal prototype board for use with the Arduino UNO. The boards are nicely made and the quality is amazing for the low price!
A prototype board for use with the Arduino Pro Mini. There were no prototype boards to find for this module so I made this. The boards are nicely made and the quality is amazing for the low price!
1 ... 95 96 97 98 99 100 101 102 103 104 105 ...