Best $10 ever spent.
Uses arduino Nano with loadcell, hx711, lcd (s7789), and fsr to measure knife sharpness.
The project is a PWM controller to allow computer automation to dim and brighten an astrphotography flat field panel made with an EL panel and inverter.
This is a failed design because the third potentiometer (knob) is connected to a digital GPIO pin and not one of the three dedicated analogue pins. This will be an easy fix for the next version. Exce...
Another great PCB from PCBway! With quick turnaround. Very happy. Thank you!
This was our first rigid flex design. The feedback on this by PCBWay was very helpful! Thank you PCBWay!
Perfect!
Perfect and very fast!
Perfect as always, thanks!
Extremely fast delivery and a very high quality boards at a very reasonable price. Even during COVID boards arrived sooner than expected. Would highly recommend them for proto-type boards. Had issue w...
The quality of the finished product was excellent, and the whole process was very smooth. I will be using PCBWay in the future for more custom work.
Board to allow a Raspberry Pi Pico to control a set of seven touch sensors, each sensor has a dedicated LED strip. The circuitry of the board works well, but it needs a few tweaks to the silkscreen to...
Perfect
Perfect!
Perfect!
Amazing service