Great!
Many questions but all relevant to design versus manufacturability. It took extra time but prefer working through the manufacturability issues before making
Many questions but all relevant to design versus manufacturability. It took extra time but prefer working through the manufacturability issues before making
Adapter required to consume the minimum backfocus between the Wander Electronic Tilt Adjuster and the Wander Mini V2 Rotator. Beautifully made, threads fit pefectly.
10/10 as usual. All PCBs were built to the same great quality. Tiny silkscreen text came out great too
10/10. Print came out absolutely great despite the 1mm walls which were relatively flexible. In fact they were so flexible, I accidentally broke it while fidgeting with the flexibility (I take full re...
10/10. Despite relatively thin walls the print came out great.
fine parts
Great quality, as always with PCBWay
Many questions but all relevant to design versus manufacturability. It took extra time but prefer working through the manufacturability issues before making
Many questions but all relevant to design versus manufacturability. It took extra time but prefer working through the manufacturability issues before making
Replacement Rotator for SQA106 to give ~4mm of Backfocus back. Item is exactly as specifed, beautifully made. Anodizng is perfect. However, i made a mistake with the specifcations so it does not wor...
10/10. Feels very sturdy and very well made.
10/10. Print came out great. Looks like a mass produced part with no visible errors or layer lines
10/10. The print feels very smooth with very few obvious layer lines. Extremely durable, very close to designed dimensions
Same project as above, the assembly worked out quite we and we're up and running.