Part recommendations and replacements all worked well
This is our second assembly job with pcbway. We like the continuous communication and letting us know if there are any issues.
Amazing Support. Amazing work. They followed up with me on every step.
USB connector J1 electrically connected on 8 out of 10 boards.
Our first use of the PCB Assembly service went very smoothly. PCBWay support team was extremely helpul and responsive all along the manufacturing process. They helped us in many ways, from using the o...
Thankyou
Work all fine, only in my design of pcb must adjust aux12v out, instead i will replace the mosfet with a relay
good quality
This is our first assembly job with pcbway. We like the continuous communication and letting us know if there are any issues.
My project is an 8-way USB-to-UART converter board based on the WCN CH348 chip. The board takes in USB 2.0 High-speed through an USB B cable, and provides 8 serial outputs that can be set to either 1....
A small DC-DC converter with Battery management, well realized and executed by PCBWay.
Boards are excellent quality as always.
test
Assembly was good, however one of the 5 boards only had a manufacturing defect and only 8/20 chips worked. The remaining 4 boards worked perfectly.
all good
great work. Excellent assembly work and cleanliness