The assembly of my board was done perfectly by pcbway. Unfortunately the board not 100% working, there's an issue that I faced regarding the sensing of the battery by the charger IC. I should've follo...
Because there're a lot of parts in the BOM, and it was during this time I started to feel the impact of the pandemi, which is the shortage of component in supplier (Digikey and Mouser). Some of my par...
In the assembly of this board, there're several axial through hole resistors, radial aluminium electrolytic capacitor, and also one axial through hole diode. Some through hole connector for example ID...
The assembly for this small board was perfect, I've got no complain. Actually this is my first time to have a 8p8c modular connector on my board design, the connector for RJ-45 cable. And I just know ...
Seems to be correctly mounted. Boards looks good! :)
Eventhough the board was just small 36mm x 25mm, the assembled quality of the board was same good quality.
All parts assembled perfectly, well aligned, orientation all were good. Fine pitch component were soldered pretty good. The sample of assembled board photo was sent to us for confirmation before concl...
Nice production.
This board also my first design that has a lot of components assembled not only in the top, but also a lot in the bottom side. When I got the board, I tested it, and actually everything were working. ...
It's a small board with simple circuit and minimal component. No problem, no issue faced, thanks. Good job!
The assembly was perfect, I've got no complain. Only very weird that among 5 boards, there's actually 1 board that has microcontroller can't be programmed, it's not responding when I do it like usual ...
The assembled board was perfect, and I have no complain about it. For 0805 SMD LED, actually everytime when the assembly person sent me an e-mail to confirm the correctness of the assembly process, I ...
The different in quality of the assembled board, that I experienced was actually the bond of the copper trace and also solder pad to the board FR-4 material are quite strong. Many times in my experien...
The component outsourcing was good, and the quality of the parts are guaranteed as it come from trusted world-wide supplier Digikey. The assembled parts were good not only for SMT, but also the throug...
Nice production.
This one was a real pleasure. Not only was the quality of the worke done high as always, but this thime i made a lot less failures in my design and most of the PCB works propperly. Without your help,...