Perfect
Good pcb, fast service.
This is a hobby project consisting in a multi-copter flight controller. In the past, tests were done with external ITG/MPU gyroscope module; this time, it is built-in in the pcb together with a magnet...
We ordered the necessay boards for a production we had. The quaality was very good, the delivery was fast and on the estimated time, so very happy with the service received. Thank you PCBWay. We will ...
I am using this nfc built-in antenna with a M0 processor
This PCB is used to read analog sensors and to control a robotic arm. The robotic arm is installed over a rover. Using this arm the rover can take objetcs with a remote control.
Each one of this board have 8 outputs and 8 inputs. The input is protected with a zener to limit the voltage and protect the microcontroller. The output have a transistor and give 500mA at 12Vcc to po...
SENSORS CONTROLLER MINI, DIAMETER 66MM, 6 ANALOG INPUTS AND 12 DIGITAL INPUTS / OUTPUTS
Perfect.
Good quality and good price.
We did some prototypes to test the boards before running the producion. We were very satysfied with quality and delivery time, so we decided to repeat producion with PCBWay. Well done guys!
This is the control PCBA
This PCB is used to control a motor with encoder. The pcb read the encoder and the system variables and generate an output that other system read to control a industrial process.
Simple circuit. Transforms 24V to 12V to power an adjustable flashing circuit for a led strip of 200mA.
GGUC is an embedded PC for industrial purposes applied to the field of IoT and Industry 4.0.
OUTPUT AND INPUT FOR DIGITAL AND ANALOG CONTROL OF SENSORS