I am using this nfc built-in antenna with a M0 processor
This PCB is used to read analog sensors and to control a robotic arm. The robotic arm is installed over a rover. Using this arm the rover can take objetcs with a remote control.
Each one of this board have 8 outputs and 8 inputs. The input is protected with a zener to limit the voltage and protect the microcontroller. The output have a transistor and give 500mA at 12Vcc to po...
SENSORS CONTROLLER MINI, DIAMETER 66MM, 6 ANALOG INPUTS AND 12 DIGITAL INPUTS / OUTPUTS
PCB FR4 control leds.
16 switches and 16 leds with I2C bus. Leds have a dim mode and customize flash rate in hardware mode (without i2c data string). Switch control have interruption output.
I am developing my own electronic product to test a wide variety of electronic parts of the vehicle.
Standby control for audio amplifier, Very fast production and very good comunication with customer service, PCB's are perfects, Double cooper for better current handling.
This PCB is used to control a motor with encoder. The pcb read the encoder and the system variables and generate an output that other system read to control a industrial process.
Simple circuit. Transforms 24V to 12V to power an adjustable flashing circuit for a led strip of 200mA.
GGUC is an embedded PC for industrial purposes applied to the field of IoT and Industry 4.0.
OUTPUT AND INPUT FOR DIGITAL AND ANALOG CONTROL OF SENSORS
AgoraBot-V1 is a robot with 2 servo and sensors controlled by Arduino for educational purposes in Alcoi, Spain
There were placed a 30 units order of a 175x100mm PCB with SMD/TH Components Assembly. The final product, service and shipment were perfect (100/100). The quality of the silkscreen is amazing and the ...
I am developing my own electronic product to test a wide variety of electronic parts of the vehicle.
I used PCBWay to create a quick turn prototype of a DC motor controller. I'm very happy with the results and I will use their service again!