This is a PCB for a switching power supply based on the LM2676S. One of the best factors about this design, is that it can fit any version of the 2676 with some simple configuration changes with resis...
This board's purpose is a filtering system for the Langmuir probe. This PCB is part of a stack of PCBs that will join to become a Langmuir probe. Using this hardware, we will measure the field of the...
This board is the main flight computer of our system. It utilizes an STM32 to record data recovered from the Langmuir probe onto an SD card and flash memory. It also includes two stepper motor drivers...
This PCB is the main controller for all of the sensors on our ADSB direction finding payload. It houses an MSP432, a barometer, stepper motor driver, SD card reader, and a few other systems. The main ...
Excellent quality as always
Very impressed by the quality of the framework
Review, manufacture and delivery all in time, works perfectly, Thanks!
Great Quality
This board's purpose is to use an STM32 to record different data points using a variety of sensors. Another notable item is the real-time clock which will assist in mission stability. This PCB is par...
This board's purpose is to generate a wave from the +/- 15V power supplies to the Langmuir probe through coax cables. This PCB is part of a stack of PCBs that will join to become a Langmuir probe. Us...
The main purpose of this board is to receive 28V from 3 separate power sources and then convert it into five different voltages, 15V, -15V, 12V, 5V, and 3.3V. This PCB is part of a stack of PCBs that...
Worked
Good
Review, manufacture and delivery all in time, works perfectly, Thanks!
Absolutely Perfect!!! Tried the no frame work stencil for a smaller board and it worked perfectly.
Great Quality