This is only my second foray into PCB manufacture, and I am please to say that the success I had with my first board has been matched by my second. Once again PCB Way has delivered exactly what I had...
El trabajo es muy bueno, se recibe la placa con todos los requisitos y calidad. buena experiencia.
Sunn Model T pre - amp for guitar and bass. Produce huge amounts of sub-harmonics and crush your enemies with irreversible industrial deafness. 2 Channels (normal + bright), and Channel bridging. Thre...
The plant lamp timer, allows you to automatically turn lights on and off on a predetermined schedule, without human intervention. It is also possible to manually turn the light on and off. The lighti...
Excellent job!
I haven't tested it yet, but judging by the image, there is no problem with the pcb and it is very solid.
You are the best! PCBs delivered on time, top quality! Thnx
This PCB is for power distribution inside the robot i'm building called Fredrick. I'm extremely pleased with the service I received from PCBWay. The product is 100% flawless and has a beautiful finish...
PCBway makes a verry good and fast job. I'm happy.
Perfect production in time and cost. well done
The kitchen multitimer is based on the STM32F103C8T6 microcontroller. The device allows to start up to 16 independent timers simultaneously. It is possible to correct the exposure time of each timer. ...
This has been my first 2 oz Cu PCB and I found it very well made. All the elements of the board were perfectly executed. The silkscreen weas almost perfect even in the tinyest details. The big pads wi...
Everything is as expected, the work is good, after installing the rest of the equipment is beautiful.
Made and assembled with great quality
The boards worked Great as there was no HOT spots in traces... not even a warm spot. The product holds up good when soldering and no color fade or peeling. Traces are well protected and well done. ...
It was very good quality for that small PCB! I was new in PCB making, but it turned out great. I check every connection on the PCB with my multimeter and later I watched a video and saw that PCBWay ch...