Complex geometry (small hole and slot) and multi sided machining came out perfectly.
Perfect CNC quality. Colour as I want and order. The sandblast made a good shape without any defects.
Pressure sensor crimping die
I replaced a broken injection molded plastic shower arm holder with one CNC machined from stainless steel, with electropolishing to finish. The cost of CNC machining is impossibly expensive in the USA...
Excellent work! exactly as requested, I'm really happy :) Aluminum 5052, Sanding 500, Power Coat PANTONE 433U No tighter tolerances required (ISO 2768-1) Standard Inspection (No paper report) F...
Perfect fabrication, smooth and quick delivered after 14 days! Stainless steel, threads: NPT 1/8'' and M30x2
Good quality; tolerances reasonably met. Exactly to spec. Thanks!
great threads on those
Complex geometry (small hole and slot) and multi sided machining came out perfectly.
Parts arrived fast and well packaged, all within tolerance, and look great! Excellent value for small prototype runs.
Excellent job, beautiful parts!
Great execution, all good!
i'm generally very pleased! i requested a frosty finish, and although the option was not available upon order, PCBWay were able to source the material anyway. comparing the right and left side, they a...
I built an electric dune buggy and needed custom made bearing mounts for a custom idler shaft for the chain drive and reduction. The CNC bearing mounts were beautiful! All tolerances were perfect and ...
excellent machining in poly carbonate. no accidental burrs or other mishaps.
Thread spacing from neck of 1mm not applied, gap <0.4mm which is outside of the acceptable tolerance of +-0.1mm.
1 ... 11 12 13 14 15 16 17 18 19 20 21 ...