Works great and works perfectly. PCBWay never likes the ground plate in the corner of a Gameboy Cartridge, but that was for testing and it doesn't really matter. I had to answer some minor engineering...
One of the aspects I appreciate most about PCBWay's assembly service is the consistent communication throughout the entire process, ensuring everything proceeds smoothly. For instance, after submittin...
As always wonderful job. Thank you Go to section Programmer/Debugger Adapter on the article below http://engredu.com/2024/10/30/stm32c011j-with-icm-42605/
Everything looks good and seems to work well
Phenomenal quality. It came out extremely well, im very impressed. It felt like stone, which i didn't expect but I love. Took slightly longer than estimated to finish printing, but shipped and was ...
Great quality. No chips or cracks, only a few visible layer waviness. This could be sanded and polished away if need be. No complaints.
Tantalus is a chandelier with 6 articulating tentacles, led MR-16 bulbs at the end of each tentacle. Tantalus uses a Raspberry Pi 5 with a camera and Hailo AI hat to determine what to point the tentac...
Boards arrived in good time. Quality is very good. Looking forward to build this project.
The parts were to dimension and worked perfectly for the intended task there was a single Burr on the end of the part which would have been hard to get but otherwise I have no gripes about it As s...
Easy board, as always good service.
I was very happy with the build time and the shipping time. Quality of finished PCB's is of the highest level. I send files out on Sunday, and received PCBs in the mail on the following Friday. From C...
The part turned out fantastic. The gold color is very close to what I was looking for. The cost in quantiles is very good as well. Here is a review video I did on YouTube. https://youtu.be/9yMbxceadB...
Came out exactly as I had hoped. Very minimal layer lines are visible in some places. They could be polished if need be. If you order these in clear resin, do not select tapped threads. I’m going to h...
Not quite as smooth as my PLA printed parts but useable. Review video can be found here. https://youtu.be/fjRPhw2mm7s
This part looks simple but is deceptively challenging to make with some complicated profiles, internal cuts, tapped threads, and off axis angled wings. I wish PCBWay's auto-quote was a bit better so t...
The boards arrived extremely well packaged and in a padded vacuum-sealed bag. They are simply beautiful!
1 ... 10 11 12 13 14 15 16 17 18 19 20 ...