My board is an art project, and was important that the silk screen, copper, and solder mask were properly aligned. The board came out exactly how I wanted it. I attached a picture, but had to compress...
Perfect quality.
Dual layer PCBs for a custom controller with lipo battery circuitry, buttons, micro SD card, and i/o expander. The boards were well made and look great!
I was completely impressed with their professionalism and customer service. This is actually my second order. And I am very satisfied with the result. I experienced with another pcb manufactured compa...
I have had a pleasant first experience. My project is a single layer PCB for push-in components (non-SMD). Communication has been fast and effective. I received the order in Spain in a very short time...
Basic open source shield for Microdesys ESP32 open source board
ESP32 Open Source Board for Educational Purposes
The card is perfect , thanks.
Evaluation board to check the performance of an 869MHz chip antenna, I didn't provide any specific requirements for the trace impedances but still came back exactly to my specification and was able to...
Assembly: The boards were well assembled with good quality - though there seems to be a short on all the assembled boards which shorts the VBAT to GND and prevents the system from running off of batte...
I designed this board in KiCad as part of a larger open hardware project (https://github.com/rrainey/tempo). I've used PCBWay for many PCB projects but this was my first experience using their PCB A...
Controller for a Nema17 stepper motor that controls a filament rewinder. The basic speed can be set, as well as a limit switch and also with right / left run.
素晴らしい！ありがとうございました。
Thank you PcbWay!
cool stuff with complete casing shield, just need box, i thnks square shape would be nice.
Great finish fast on processing and shipping