It's a board to control two sets of bi-colour leds for a signal bridge in my H0 railway layout. One set of leds will be part of the control panel and the other set will be part of the signal bridge. T...
Digital clock built with NIXIE lamps
PLACA PARA DESTE DE EGS
Платы получил через 20 дней, изготовление подымаю в разряд очень качественно и точно. Полное соответствие параметрам заказа. Ставлю 5 звезд.
Good work!
Project by Darren Jones (https://github.com/Black-FX/RP2040_Mouse_KiCAD) https://www.pcbway.com/project/shareproject/RP2040_USB_Mouse_to_Quadrature_15de42f1.html Excellent quality boards populated...
We use this stencil to apply solder paste to the GBA before mounting the SiPM chip.
Connector board from PCB edge connector to 136 UMC connectors. This is a 6-layer PCB to allow the very densely positioned UMC connectors to be placed in a logic order, on a PCB size that was limited b...
As always, the boards are well done and the pre-production support is fantastic. Having deliberately put the 10 lettering in the copper layer, the costumer service asked me to confirm that it had not ...
Çok kaliteli üretim ve Türkiye ye hızlı ulaştı. Teşekkürler.
En si todo fue muy fácil desde subir mis archivos Gerber hasta realizar el pedido , la comunicación fue excelente si hay algún problema con tu diseño te lo notifican inmediatamente para que puedas hac...
The goal of this board is to control the output for a couple of 3-pin bi-color leds to be installed in an H0 railroad layout as a part of a signal bridge. Certain combinations are allowed while others...
As always good quality http://engredu.com/2024/06/08/ftdi-to-uart/
Project by Darren Jones (https://github.com/Black-FX/RP2040_Mouse_KiCAD) https://www.pcbway.com/project/shareproject/RP2040_USB_Mouse_to_Quadrature_15de42f1.html Excellent quality boards populated...
This is a very small PCB with a SiPM photo sensor. The PCBs came out very nice and were delivered quickly! We were able to mounts the SiPMs at our lab in a small reflow oven.
I used this one to show the size of some of my boards