Excellent service and great Assembly!
All were great.
No problem found on any of the 10 boards. Programming the MCM with Short-Test program showed no shorts or open connections anywhere on the 10 Boards. Excellent work.
This was my first time using PCBWay for assembly. I am very happy with the results. I will likely do this again and recommend that my colleagues use this service too.
Boards look good and appear to function as expected. Thanks!
Solder on all boards is very professional. Small project but board constriction is excellant.
Assembly was great.
I am VERY happy with the competence of the in-house engineering crew. They were able to source all of the parts I called out and even program the microcontroller on board. The process took a few weeks...
All were great
PCBs all worked as intended. There were a few questions based on my oversight/omissions. Unfortunately, the turnaround for each question and answer was 2 days due to the 12 hours of time difference.
My first project I had assembled by PCBway...Very satisfied!! Turned out better than expected. Thank you!!
A version of Tony Starks Arc Reactor. It can be powered by a power bank and reprogrammed to utilize all 24 RGB LEDs. Does need an external 10k pullup resistor between Reset and 5v. Will fix for fut...
Assembly of these units is excellent. First board came up with no problems and has had no errors so far in test.
It was a full turn. Satisfied with the result. there was even some extra parts and boards in the box.
I've used PCBWay before and have had great results. This order was the best yet. 100% of the populated boards worked correctly. They delivered on time. Great job!
6-Layer 1 ounce board with traces down to 5 mils and via holes as small as 8 mils. All worked as designed. Very happy with the work.