Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
The assembly for this line sensor was very high-quality. The QRE1113GRs were soldered on very well, and it all came together for my line following robot.
This is the carrier board for the S3P, it worked great, and looked amazing with the black soldermask and two layers. It went in a line follower, and has a 5V regulator, 9V regulator, a custom ESP32-S3...
ESP32-S3 development board, with a magnetic buzzer, 16MB flash, 8MB PSRAM, chip antenna. There are 21 GPIOs broken out on the board, and it worked amazingly. It is in my line follower robot, and I hav...
An all-in-one antweight combat robot controller. Absolutely flawless boards, I reflowed them myself using an MHP50 hotplate, and the purple soldermask + HASL finish was really nice.
This was a line sensor, with 8x QRE1113GR. It worked great.
The assembly for this one was perfect. Couldn't have asked for a better job at soldering this one, I couldn't do the 0.4mm pitch QFN myself lol.
A UART programmer for ESP32s based on the CH340X with auto-download mode, boot and reset sequence is automatically carried out :) The PCB was amazing, and impedance matched for USB. I've never had an ...
Thanks for giving me the 2023 Christmas PCBWay gift pack! Very cool! 😁
1 2