Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
Excellent work by PCBWay as always. For this board I had to over design it significantly because of component shortages. A much more compact design is possible (using probably less than half the boar...
Thanks, excellent work as always
For evaluation of the Jackson Labs LTE Lite module, mounted on a header (for easy re-use). Buffers signals, allow selection of output (GPS / CPU) to USB, has support for external antenna. I also desig...
Pi 4B daughter board for OpenTTP version 2 (see www.openttp.org). Accepts signals from Signals board.
Excellent service, as always.
Excellent service, as always.
The board has provision for 3 pulse inputs (into 50 Ohm, any level from about 1 V to 5 V will work) and two buffered (50 Ohm, ~ 1.5 V) pulse outputs. It also has provision for a character LCD display ...
Excellent work as always. Thanks.
Takes an ILI9488 SPI 3.5 inch TFT display (320x480) and a Raspberry Pi Pico to make a nice standalone display solution with plenty of options - your software decides what happens. I wrote a write-only...
Takes 12 V input and provides 5.1V for Pi 4B and 5V for signals, display and USB hub.
Signals board for OpenTTP version 2 (see www.openttp.org). Houses GPSDO (LTE Lite) and GPS Rx (ublox RCB-F9T) and generates / buffers signals to and from IO and Raspberry Pi 4B.
Excellent service as always.
My attempt to make a metrology grade environment sensor. I found that cheap humidity sensors are not worth using as they drift too much when exposed to condensing atmospheres, so I am using an expensi...
As always (I've been using PCBWay for many years) the service was excellent.
1 2 3 4 5 6