Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
purchased for test and debug of upcoming project ideas
Need to test FPC cables that connect to 0.3mm connectors. Bring out signal pairs to SMA and provide method for compensating the characteristic impedance of the cables and test-stand.
stencil did its job as expected
Nice assortment of heat shrink tubing. Handy to have around the bench.
Made testing impedance much easier when adapting from 0.3mm flex to sma and FMC connectors
Solved my problems with custom cable adapter board for impedance testing. Would order again.
Does what it is supposed to do. Boards were made as 0.8mm as we requested with a nice immersion gold finish.
Because the FPC connector has 0.3mm pin pitch we need to reflow the solder. Screen makes applying the solder paste simple and efficient.
Adapter to go from 0.3mm FPC cable to 2mm PTH connectors. To be used for baseline testing of FPC with respect to cross-talk and some eye diagrams to give indication of the bit error rate we can expect...
Boards are performing as expected.
Makes soldering FMC connectors much easier when using reflow oven.
Made assembling custom connector adapter boards easier. 0.3mm pitch connector reflow no problem.
Does what it is supposed to do. Boards were made as 0.8mm as we requested with a nice immersion gold finish.
good quality, on time, works as expected, would order again.
1 ... 13 14 15 16 17 18 19 20 21 22 23