- Sensors
- Wireless & IoT
- Arduino-related
- Raspberry Pi-related
- LCDs & Displays
- PCBWayer Bazaar
- AI & Robotic
- RISC-V & Linux
- LEDs
- Cables & Connectors
- PCBWay Gadgets
- Power
- Coupons
-
Mechanical Parts
- Fastening & Spacing
- Linear Motion & Positioning
- Structural Framing & Assembly
- Enclosure, Panel & Cable
- Power Transmission
- Bearings & Rotary Support
Fastening & Spacing
Linear Motion & Positioning
Structural Framing & Assembly
Enclosure, Panel & Cable
Power Transmission
Bearings & Rotary Support
- Instrument & Tools
- Subtotal: 0 Items
- (exclude shipping fee)
Description
Description
The STM32MP157A-DK1 and STM32MP157C-DK2 Discovery kits leverage the capabilities of STM32MP1 Series microprocessors to allow users easily develop applications using STM32 MPU OpenSTLinux Distribution software for the main processor and STM32CubeMP1 software for the co-processor. They include an ST-LINK embedded debug tool, LEDs, push-buttons, one Ethernet
1-Gbps connector, one USB Type-C? OTG connector, four USB Type-A Host connectors, one HDMI? transceiver, one stereo headset jack with analog microphone, and one microSD? connector. To expand the functionality of the STM32MP157A-DK1 and STM32MP157C-DK2
Discovery kits, two GPIO expansion connectors are also available for Arduino? and Raspberry Pi? shields. Additionally, the STM32MP157C-DK2 Discovery kit features an LCD display with a touch panel, and Wi?Fi? and Bluetooth? Low Energy capability.
Features
Common features
- STM32MP157 Arm?-based dual Cortex?-A7 32 bits + Cortex?-M4 32 bits MPU in TFBGA361 package
- ST PMIC STPMIC1A
- 4-Gbit DDR3L, 16 bits, 533 MHz
- 1-Gbps Ethernet (RGMII) compliant with IEEE-802.3ab
- USB OTG HS
- Audio codec
- 4 user LEDs
- 2 user and reset push-buttons, 1 wake-up button
- 5 V / 3 A USB Type-C?power supply input (not provided)
Board connectors:
- Ethernet RJ45
- 4 × USB Host Type-A
- USB Type-C? DRP
- MIPI DSISM
- HDMI
- Stereo headset jack including analog microphone input
- microSD? card
- GPIO expansion connector (Raspberry Pi? shields capability)
- Arduino Uno V3 expansion connectors
On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration
capability: Virtual COM port and debug port
STM32CubeMP1 and full mainline open-source Linux? STM32 MPU
OpenSTLinux Distribution (such as STM32MP1Starter) software and
examples
Support of a wide choice of Integrated Development Environments (IDEs)
including IAR?, Keil?, GCC-based IDEs
Board-specific features
- 4" TFT 480×800 pixels with LED backlight, MIPI DSISM interface, and capacitive touch panel
- Wi?Fi? 802.11b/g/n
- Bluetooth? Low Energy 4.1
- Comments(0)
You might like
Each product has its own promotion link, you can share the link with your friends.
2. Successful transaction
Your friend places an order through the link, and the transaction is complete.
3. Get commission
You will receive a commission correspondingly proportional to the order amount.