0 Cart

Your gift shopping cart is empty.

Product Description

ESP32-S2 Microcontroller 2.4 GHz Wi-Fi Development Board

Characteristics

Compact size, rich peripheral interfaces, integration of low-power Wi-Fi system on a chip (SoC) and large-capacity memory, and support for ecological development board of Raspberry Pi Pico expansion board. With hardware encryption accelerator, RNG, HMAC and Digital Signature module, it can meet the security requirements of the Internet of Things. A variety of low-power working states can meet the power consumption requirements in Internet of Things (IoT), mobile devices, wearable electronic devices, smart homes and other application scenarios.

ESP32-S2 normal edition features:

Support Raspberry Pi Pico expansion board ecology, and meet the creative application development of Internet of Things.

Xtender NSA single-core 32-bit LX7 microprocessor ESP32-S2FH4, which supports clock frequency up to 240 MHz

Integrated 320KB SRAM, 128KB ROM, 8MB PSRAM and 4MB Flash memory

Support IEEE802.11 b/g/n, on-board 2.4 GHz WiFi ceramic antenna, and the highest data transmission rate of 150Mbps

Adopt Type-C interface, keep up with the trend of the times, and don't have to struggle with forward and backward insertion.

On-chip integration of full-speed USB OTG, SPI, I2C, UART, ADC, D/A, PWM, DVP 8/16 Camera interface, LCD interface (8-bit serial port RGB/8080/6800), TWAI controller (compatible with ISO11898-1), capacitive sensor GPIO, temperature sensor and RMT (TX/RX)

On-board 1.8A high-efficiency step-up and step-down DC-DC TPS63000 power IC

Support a variety of low-power working states, adjust the best balance among communication distance, data rate and power consumption, and meet the power consumption requirements of various application scenarios.

Stamp hole design, which can be directly welded and integrated into the bottom plate designed by users independently.