Product Description

Particle Boron LTE CAT-M1

Description


The Boron LTE is a powerful LTE CAT-M1 enabled development board that can act as a standalone cellular endpoint. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes.


The Boron LTE CAT-M1 (NorAm) or BRN402 features the same form factor as the rest of the Particle’s Boron series modules and comes with a full set of regulatory and industry certifications to dramatically accelerate time to market. The BRN402 is certified only for use with the Taoglas Cellular Flex Antenna 2G/3G/LTE 5dBi.


Please note: Use of a different antenna with the above module may violate regulatory certifications and require additional certification. Refer to our antenna documentation for additional information regarding regulatory compliance and certification of Particle modules.


Contents:

  • Boron LTE development board (On-board SIM, no card necessary)
  • Cellular flex antenna


Specs:

  • u-blox SARA R410 LTE modem

-LTE CAT M1 module with global hardware support (MVNO support for US only)

 -3GPP Release 13 LTE Cat M1


  • Nordic Semiconductor nRF52840 SoC

 -ARM Cortex-M4F 32-bit processor @ 64MHz

 -1MB flash, 256KB RAM

 -IEEE 802.15.4-2006: 250 Kbps

-Bluetooth 5: 2 Mbps, 1 Mbps, 500 Kbps, 125 Kbps

-Supports DSP instructions, HW accelerated Floating Point Unit (FPU) calculations

-ARM TrustZone CryptoCell-310 Cryptographic and security module

 -Up to +8 dBm TX power (down to -20 dBm in 4 dB steps)

-NFC-A tag


  • On-board additional 4MB SPI flash
  • 20 mixed signal GPIO (6 x Analog, 8 x PWM), UART, I2C, SPI
  • Micro USB 2.0 full speed (12 Mbps)
  • Integrated Li-Po charging and battery connector
  • JTAG (SWD) Connector
  • RGB status LED
  • Reset and Mode buttons
  • Dual SIM support: Nano 4FF (unpopulated) and MFF2
  • U.FL connector for external antenna
  • Meets the Feather specification in dimensions and pinout
  • FCC and PTCRB certified
  • RoHS compliant (lead-free) 

  • Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
    View More

    You might like

    • Pico Dual-channel Network Transparent Transmission Expansion Board
      $12.99 or 1560 Beans
      BUY NOW
    • Yahboom programmable Tumble:bit based on Micro:bit
      $59.99 or 7200 Beans
      BUY NOW
    • ESP-12H-Kit development board
      $5.99 or 720 Beans
      BUY NOW
    • 2.4G Wireless SPI Mini Module
      $1.49 or 180 Beans
      BUY NOW
    • HiLetgo SX1276 ESP32 LoRaWAN
      $19.99 or 2400 Beans
      BUY NOW
    • E18-MS1-PCB
      $6.00 or 720 Beans
      BUY NOW
    • Heltec Arduino ASR6501 Lora Development Board
      $15.99 or 1899 Beans
      BUY NOW
    • 0.96" Inch Oled LoRa ESP32 SX1276 Module(868/915MHz Antenna)
      $22.00 or 2640 Beans
      BUY NOW
    • X302 bluetooth 5.0 power amplifier module (Euro-standard adapter)
      $35.00 or 4200 Beans
      BUY NOW
    • X302 bluetooth 5.0 power amplifier module (US-standard adapter)
      $35.00 or 4200 Beans
      BUY NOW
    • NF-01-S 2.4G Wireless Remote Control SPI Module
      $1.00 or 100 Beans
      BUY NOW
    • E220-900M22S LLCC68 LoRa Module
      $4.00 or 480 Beans
      BUY NOW
    • Particle Boron LTE CAT-M1
      $60.00 or 7200 Beans
      BUY NOW
    • BeagleBone Black - Rev C
      $66.00 or 6600 Beans
      BUY NOW
    • SimpleLink Wi-Fi CC3200 LaunchPad
      $0.00 or 5600 Beans
      BUY NOW
    • ESP32-S2-Saola
      $10.00 or 1200 Beans
      BUY NOW
    • Octavo Systems OSD32MP1-BRK Prototyping Platform
      $0.00 or 4100 Beans
      BUY NOW
    • STM32MP157C-DK2
      $0.00 or 10100 Beans
      BUY NOW
    • Giant Board
      $70.00 or 7000 Beans
      BUY NOW
    • ESP32 Cam WIFI Bluetooth Module
      $12.00 or 1440 Beans
      BUY NOW
    Product Name
    Link for reference
    Quantity