ESP32 NodeMCU-32S Lua WiFi IoT Development Board
We are holding the "4th PCB Design Contest",Looking forward to see your projects
https://www.pcbway.com/activity/4th-pcb-design-contest.html
Module model: NodeMCU-32
Size: 25. 4mm(W) *48. 3mm(H) ±0.2 mm
Package: DIP-38 (2.54 pitch standard pin header)
SPI FLASH: default 32Mbits
Support interface: UART/SPI/SDI0/I2C/PWM/I2S/IR/ADC/DAC
Frequency range: 2400^2483. 5MHz
Serial port speed: support 300 ~ 4608000 bps, the default is 115200 bps
Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
SPI Flash: Default 32Mbit, maximum support 128Mbit
Working temperature: -20℃~70 ℃
Storage environment: -40 ℃~125 ℃, <90%RH
Power supply range: Micro USB power supply voltage 4. 75V, 5. 25V, recommended 5.0V
Power supply voltage 3.0V, 3.6V, power supply current> 500mA, recommended 3.3V
Certification: FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC/BQB/RoHS/REACH
Features:
- 802.11b/g/n (802.11n, speed up to 150Mbps);
- WIFI frequency range 2400-2483.5MHz;
- The adjustment range of clock frequency is 80 MHz to 240 MHz, supporting RTOS;
- Built-in 2 channels 12bit high-precision ADC, up to 18 channels;
- Support UART/GPIO/ADC/DAC/SDIO/PWM/l2C/l2S^n;
- Support multiple sleep modes, the sleep current of ESP32 chip is less than 5rA;
- Built-in Lwip protocol stack;
- Support STA/AP/STA+AP working mode;
- Support serial port local upgrade and remote firmware upgrade (FOTA);
- General AT commands can be quickly started;
- Support secondary development, integrated Windows, Linux development environment
- Comments(3)