Product Description
I2C Interface Of Raspberry-Pi 16-way Servo Drive Board
Characteristics
- Based on Raspberry Pi 40PINGPIO interface design, it is suitable for Raspberry Pi series mainboards and Jstson Nano
- I2C interface control, only two signal lines are needed to drive the steering gear
- Up to 16 channels of ostrich or PWM output are supported, and each channel has 12-bit resolution (4096 level)
- On-board 5V voltage regulator chip, which can output 3A current and can be connected to battery for power supply through VIN terminal
- Standard onboard steering gear interface, which can be connected to SG90, MG90S, MG996R and other common steering gears
- I2C control interface is reserved for easy access to other main control boards
Product parameter
- Supply voltage: 5V (raspberry pie interface) or 6V~12V (VIN terminal) and logic voltage 3.3V
- Actuator voltage: 5V
- Driver chip: PCA9685
- Control interface: I2C
- Via hole diameter: 3.0 mm
- Product size: 65 x 30 mm
- Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
View More
You might like
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Jetbot Mini AI Vision Robot Car ROS Starter Kit（with NVIDIA Jetson Nano 2GB)$299.99 or 36000 BeansBUY NOW -
-
