Bit Dot Matrix Module
Description
This is a module that integrates two 8x8 dot matrix screens, supporting the display of letters, expressions, patterns, and more. The 4Pin alligator clip interface is designed on the bottom of the dot matrix, the 4Pin pin header interface is designed on the back, and the 4Pin DuPont line interface is reserved on the front side (the default is not soldered). Users can use these interfaces to match the alligator clip, cable, DuPont line and other electronic Device to complete IIC communication. And it also has two building block pin holes, which can be compatible with the building blocks to match different interesting structure shapes. You can also use it with our other expansion boards to create more interesting micro:bit experiments. In addition to being used for some DIY experiments, it can also be used for robot facial expressions, car head tips, and so on.
- Comments(0)
You might like
-
-
Sensor Expansion Board With PH2.0 Port for World of Module(Micro:bit)$8.99 or 1080 BeansRedeem Now
-
-
-
-
Micro:bit expansion board motor steering gear development drive board$19.99 or 2240 BeansRedeem Now
-
-
-
-
-
-
-
IoT Learning Kit Smart Home System(for arduino uno, scratch graphical programming)$89.99 or 10800 BeansRedeem Now
-
-
LILYGO T-Echo NRF52840 BME280 SX1262 LoRa GPS E-paper NFC(White-915 MHZ)$74.99 or 9000 BeansRedeem Now
-
LILYGO T-WATCH V3 Microphone IPS Capacitive Touch Screen 1.54" MCU32$45.00 or 5400 BeansRedeem Now
-