Product Description
2.8-Inch TFT LCD Touch Screen (with adapter)
Product parameter:
- Glass panel: CMI2.8 inches
- Resolution: 240 X 320 RGB
- Driver chip: ILI9341
- Interface type: 4-wire SPI serial port
- PIN foot spacing: 0.5mm
- Overall dimensions: 50 (width) X 69.2 (length) X 3.8 (thickness) mm
- Display size: 43.2 (width) X 57.6 (length) mm
- Backlight type: Samsung LED*4
- Current: 60mA
- Electricity: working voltage VDDI=VCI=2.8V-3.3V
- Total power consumption: 0.22w
- Working temperature:-20℃ ~+70℃
- Storage temperature:-30℃ ~+80℃
- Viewing angle: 12:00 o' clock (wide viewing angle display)
Pin definition:
1 GND grounding pin.
2 RESET reset signal line, active at low level.
3 SCL clock signal.
4 D/C instruction/data selection terminal, l: instruction, H: data.
5 CSX chip select signal, active at low level.
6 SDI data input signal line.
7 SDO data output signal line.
8 GND grounding pin.
9 VDD screen power supply pin, 2.8V-3.3V
10 LEDA backlight LED positive terminal.
11 LEDK1 backlight LED negative terminal.
12 LEDK2 backlight LED negative terminal.
13 LEDK3 backlight LED negative terminal.
14 LEDK4 backlight LED negative terminal.
15 x- touch screen signal line.
16 y- touch screen signal line.
17 x+ touch screen signal line.
18 y+ touch screen signal line.
- Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
-
Waveshare RP2040-GEEK Development Board, Based On RP2040 Microcontroller, With 1.14inch 65K Color LCD1200 BeansRedeem Now
-
-12%
-
-
-
-
-
-
-
-
-
-
-
-
OV2640 Camera Module 200W Pixel STM32F4 Driver Source Code Support JPEG Out P4M71000 BeansRedeem Now
-
Mini Traffic Light 5V LED Display Module Red Green Yellow Light for Arduino Raspberry Pi100 BeansRedeem Now