PT-100 Body Thermometer

* Constant current source LM334 with Rset=68R provides 1mA through the PT-100 element * PT100 varies between 100-138.5R in the range 0-100 OC * The voltage drop across the PT-100 can be measured on pin#3 of the op-amp OP777 (approx. 108mV at room temperature). * The reference voltage (108mV) on pin #2 of OP777 is set with potentiometer P1 (voltage parts) * Output voltage of OP777 (pin #6) is adjusted with potentiometer P2 (gain) and is less than 10V at temperature below 50 OC (signal limit on the AD board)

Apr 13,2023
58 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Romuald Bernacki View Profile
1posts 0followers 0following
  • Comments(0)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    Unfortunately, there was a misunderstanding when checking the component placement. I had understood the marking of the LED with plus and minus differently, namely anode = plus and cathode = minus. ...
    Custom onewheel pint x battery box. Excellent print and material build. Great customer service. Exact fitment for project. Will use for future projects
    Properly manufactured and good quality PCB, all the component placement was okay and properly soldered.
    Very impressed with the build quality. The fasteners fit like a glove into the threads and countersinks. The plate is even smoother than I expected. It does have visible milling marks (as expected)...
    Great quality & fast delivery
    Quantity 5 fairly simple 2 layer PCBAs, largely surface mount. Designed to take an ESP32 Pico Dev Kit attachment and used for test fixturing. PCBWay did a great job on these boards. During the proc...
    This is a replacement mainplate for the extruder in the Prusa Mk3.9/Mk4 printers, this item has been shown to wear with extensive filament changes. So I wanted a version that would not be as liable to...
    First time ordering av PCB and it turned out really good. It's an adater to adapt a PS2 mouse to old Amiga's, C64, C128 computer from the 80's. And it's also can adapt the old 8 bit NES controller to ...
    SHOW ME MORE