This is designed to control the fan on my Quantum sports car after the original switch failed, and the housing would have snapped if I tried to remove the switch. The housing is also not longer avail...
My little sub-oscillator project AP106 - a synthesiser add-on. Great service from PCBWay, and happy I got it right first time, too! Now selling on eBay. https://youtu.be/2-EPANXNakA
The solder-on flex PCB probe for SPI flash was delivered promptly and performs as designed.
Another great board from PPCBWay. This one is a bit more complicated, but unfortunately, I can't get the microcontrollers, so none assembled yet.
The gold emersion looks fantastic and the 2mm board gives amazing extra strengh.
The thumbring turned out perfect. It polished up to a mirror finish.
Really pleased - first revision works as expected! Made up some already and sold them. The boards are perfect quality, fitting straight into the enclosure I chose. The device is an add-on for modular ...
50 boards, getting my BOM cost down. All helps the bottom line. Thanks!
An amatuer radio shared project for a Igate, weather station and APRS tracker all in one pcb. Using inexpensive arduino and esp boards along with a few other optional parts depending on the intended e...
Great quality, delivered ahead of schedule!
Great boards! Some boards will delaminate when hand soldered, but not these. Build up one, and with a bit of fiddling with the JTAG port, worked great!
I needed to make a Dev board for testing the ESP32-WROOM-32D Micro controller. So, I made a simple break-out board for the ESP32 & am very happy with the result. Thank you very much PCBWay.
This was my first attempt at getting my PCB SMD populated and with the PCBWay plugin for Kicad this was so easy to achieve.
PCBway quality is excellent, and as always a great speed of manufacture and delivery. This is a personal project that uses the old TDA7284 to normalize the volume of the stereo in order to reduce the ...
The production quality of the boards is absolutely amazing. Zero defects found! Delivery was super quick and the boards arrived packaged with a lot of protection to not get damaged during shipping...
My second revision of this board to allow either SOIC or PDIP controllers (and evaluation of a new controller). All perfect as usual. Thanks PCBWay!
1 ... 3 4 5 6 7 8 9 10 11 12 13 ...