This is the power supply for a stereo amplifier based on the LM3886 chip.
Circuit board for cosplay IRONMAN (or other) character helmet. - Control 2 servos with max angle configuration to open helmet with a button - Turn off eyes when the helmet is open and on after 1/2 s...
A little MM tourntable preamp with smd component plus a dedicated Dual voltage PSU
CARDS FOR CONTROL lifts
This is a level translator (5V to 3.3V and 3.3V to 5V) to let arduino comunicate with bluetooth module or esp8266
A CPU module based on PIC32 with 1 RS232, 1 RS485 RTC and USB-OTG onboard
We produce parts and components for the model ship sailing. One of the components we produce - QuickWinch - is the heart of the sail boat: the winch. it is powered by a conventional DC motor, with th...
printed circuits for lifts
I'm developing an innovative system to correct the gyro drift in robotics positioning
Timer and speed regulator for fans excellent circuits competitive price fast delivery
SLREG60W is a charge controller for photovoltaic module for batteries Pb-AGM 12V and implements a LED Drivers who suitable for different types of lighting USE FACT OFF GRID. The type of charge MMPT (M...
Little PLC
This board gives the power to the whole CySkin System, regulating power from 6V to 24V. It also make possibile to share a single CAN bus to different IHB boards (part of the CySkin System).
Linear stepper motor driver with RS485 and USB interface and incremental feedback encoder
converter for analog current to voltage
Advanced features ST Nucleo Board Series including: - A ZigBee Module - A LiPo Battery Charger - An ultra-low power LDO - Connector for accelerometer breakout board