Little PLC
This board gives the power to the whole CySkin System, regulating power from 6V to 24V. It also make possibile to share a single CAN bus to different IHB boards (part of the CySkin System).
Linear stepper motor driver with RS485 and USB interface and incremental feedback encoder
converter for analog current to voltage
Advanced features ST Nucleo Board Series including: - A ZigBee Module - A LiPo Battery Charger - An ultra-low power LDO - Connector for accelerometer breakout board
RF monitor with GSM/GPRS modem. The system is supplied by solar panel and battery system,
Centam 3D
Relay board for lifts
This is a level translator (5V to 3.3V and 3.3V to 5V) to let arduino comunicate with bluetooth module or esp8266
A CPU module based on PIC32 with 1 RS232, 1 RS485 RTC and USB-OTG onboard
We produce parts and components for the model ship sailing. One of the components we produce - QuickWinch - is the heart of the sail boat: the winch. it is powered by a conventional DC motor, with th...
printed circuits for lifts
first test for our 300B kit
Our PFC series allow to use a pneumatic actuator as proportional actuators, with a precision better than 0.2mm. To have an idea about our PFC actuators pls visit https://goo.gl/ox2tp9
Project aim to realize an HMI for security and domotic applications on RS485 serial BUS using an NXP controller and a 2.4 inches TFT display with resistive touch panel. This is the 1st attempt that h...
custom CNC breakout board to use with LinuxCNC