In this project pcbway's PCB's are quite abused, as they have to remain for long time at high temperatures. They were the only pcb to remain stable for long periods of time even at 150°C.
This is a simple timer with microcontroller that read a trimmer and temporize rele.
The SL-1200 has three problems with its power supply and regulator a) the transformer mechanically hums and this is audible through the cartridge, b) the transformer has an electromagnetic field al...
PCB made in order to prtotect the electonics from transient voltages directly on the connector's interface (26 poles HD connector)
Using two double triode 6N17b and one 6N16b you can build a state of the art passive splitted RIAA phono preamp. The hq PCB from pcbway give you this opportunity.
The board are used in broadcast application to move the phase of the signal. Built to work in UHF range.
Interface Board
We want to create a control for check aquarium and plant from remote.
This board is controlled with SMS and have 4 output at relay and 4 input optocoupled. Pcb from PCBWAY very very professional.
A simple PCB to easy the connection of a Raspberry Pi to three modules: a Real-Time Clock, a barometric/temperature/humidity sensor and a particulate matter senso.
This project is for some old machines that needed the old case 3 MHz PTH 5V oscillator with new, cheap and little smd components.
This is my replica of the Predator wrist computer
use this External EEPROM memory in our project
This power supply has 5 output voltages ... 18-0-18, 48, 24 and 12 VDC and every output has 1.5 amps. Thanks a lot to PCBWAY... also this PCB's are perfectly made and very very fast delivery.
This PCB is designed to be connected to the main unit and to check the PH level.
The Quality of the PCB received is very Good. The Project is in the Early stage but I hope to finish during the next summer