verement bon
Good, worked as expected, only issue was the M2 hole that was for clamping a cable into the side of the part was not tapped on one side correctly almost like the threads had been stripped, making it n...
This part has been ordered previously and has a looser fit with the other component (pressure cap), this component had sharper edges and required a press fit to ensure it was in position, overall work...
Good well machined part, no issue fitted correctly with other brass parts
Great part and worked perfectly as expected and good tolerance to other components in the assembly
Overall good components, small internal threads in PEEK, was toleranced well for 25/30 parts ordered with some being tighter than others which did not impact the overall design just something to note
Very good machining quality!
very good quality
Good, not issue, high quality surface finish, very happy with this machining
Worked as expected, only minor issue was the color of this part was different than the other pieces of PEEK, which I acknowledge is not an issue but was interesting that it was in the same batch of pa...
Good part, only issue was sanding or minor scuffs on flat face of part, did not effect final function just something to note
Good machined aluminum part, minor variation was made to the design to accommodate machining, but PCBWAY was very good in the communication and the issue was quickly resolved
Overall good PEEK machining, some discrepancies with the dimensions of the internal holes, they were targeted at 2.5mm which would end up being slightly undersized which is normal, expect at one end o...
Very good machining quality!
Very good machining quality!
very good quality