Perfect
For evaluation of the Jackson Labs LTE Lite module, mounted on a header (for easy re-use). Buffers signals, allow selection of output (GPS / CPU) to USB, has support for external antenna. I also desig...
Pi 4B daughter board for OpenTTP version 2 (see www.openttp.org). Accepts signals from Signals board.
Thanks
Tghanks
Good job, wanted the center hole cutout but that didn't happen - otherwise great job as usual 🙂
A variable DC input to constant 12V DC output to relevant standards with EMI filtering and protection stages. Finished product was good, larger parts (capacitors) we slightly light on solder, but al...
the Design and manufactured parts met the expectations of our calibration and test team
Takes an ILI9488 SPI 3.5 inch TFT display (320x480) and a Raspberry Pi Pico to make a nice standalone display solution with plenty of options - your software decides what happens. I wrote a write-only...
Takes 12 V input and provides 5.1V for Pi 4B and 5V for signals, display and USB hub.
Signals board for OpenTTP version 2 (see www.openttp.org). Houses GPSDO (LTE Lite) and GPS Rx (ublox RCB-F9T) and generates / buffers signals to and from IO and Raspberry Pi 4B.
Thanks
Thanks
Excellent Customer Service with prompt delivery.
A variable DC input to constant 12V DC output to relevant standards with EMI filtering and protection stages. PCB was free of defects with good plating and consistent finish. Silk screen text is sli...
A battery powered two-way Ethernet switch (NO/NC). PCB's came in clean and was easy to put all the parts down. Text readability was a tad hard but this can be accounted for with thinner font thicknes...