Very happy with PCBWay support. Our project rests ok.
Yet another full turnkey project with PCBWay. Again, the process went flawlessly, and the final product is exactly as we wanted. Communication and quality control are excellent. Thanks again Karen!
Credit for this project go to michalin/easysdr of GitHub. This was my first ever order of printed circuit services and I am absolutely blown away with the helpful service and quality of product I'v...
I am new to PCB design and wanted to try creating a step-down converter to provide either 5V or 3.3V for breadboard prototypes. The 0.8mm PCB looks phenomenal with a beautiful silkscreen. Very happy w...
thank you and .pcb was done very good, very nice, good quality, and professional. it is very neat and clean even under microscope. solder mask was slightly off, but that is not a big deal.. i am hopin...
These clocks sync to NTP time servers over WiFi. The time is shown on acrylic panels edge-lit with RGB LEDs. The LEDs are mounted on circuit boards beneath the digit panels. The goal is to eventually ...
This project is for multiplexing 4 R2R or cassettes decks into one "Tape Monitor" entry on the pré-amplifier.
Extremely impressed by the quality of the finished boards and packaging. PCBWay even contacted me with photographs to ensure everything was correct before shipment. Highly recommend their assembly ser...
Great first experience with design and purchase, thank you.
Very happy overall with the result of all the parts made by PCBWay. The parts were in tolerance and their prices were very reasonable. Our project turned out great thanks to their precision!
Hello World, My project is a liquid cooled LED grow light. After using a 3d printer to make a prototype, it was time to have one made in aluminum. And by the way, engineering isn't my day job, ...
This is an Arduino Nano Servo Shield for a small robot I'm printing. I was used to make my pcb myself but it took somes hour and 1 side only. I try PCBWay for fun to see and I'm more than satisfied, f...
Printed in nylon HP-PA-12. Phenomenal surface finish and accurate dimensions! Short production time and shipping; highly recommend!
These clocks sync to NTP time servers over WiFi. The time is shown on acrylic panels edge-lit with RGB LEDs. The LEDs are mounted on circuit boards beneath the digit panels. The goal is to eventually ...
This project is for multiplexing 4 R2R or cassettes decks into one "Tape Monitor" entry on the pré-amplifier.
Definitely an awesome experience for the first time I got a PCB fabricated. The result is impeccable and the fact you can follow the steps your PCB is at is a very nice bonus I was not expecting. Init...
1 2 3 4 5 6 7 8 9 10 11 ...