Absolutely perfect, fit and finish was great. Was on the slightly smaller side dimensionally but was able to make it work. The edges and lines could of been cleaner and more crisp almost like they had...
some hard edges are bulged slightly. I recommend adding fillets to your parts. Dimensional accurate. Very strong. great low cost prototype.
I printed some samples of key caps in different materials and slight variations as an experiment. This material came out with great accuracy and the smoothest feeling surface out of my four samples. I...
I printed some samples of key caps in different materials and slight variations as an experiment. This material came out with good accuracy. Feeling slightly on the rough side, but not unpleasant for ...
Rapid turn around on a complex part. Met all our needs and requirements
Everything good
These 3D printed resin key caps work well. The small Choc stems turned out very solid with no concerns of breaking off during installation or removal. Dimensions are accurate. The small hexagonal hole...
very strong, great quality, smooth surfaces, good print orientation, the hole in the middle was slightly too small (inaccurate measurements by aprox. 1-2mm)
Finish could of been better, material seems like it shrunk alot but was able to make it work.
Some sharp edges are rounded but pretty good over all. Small details are preserved. Threads came out a little tight but after applying lube they worked great.
I printed some samples of key caps in different materials and slight variations as an experiment. This material came out with good accuracy. The switch stems were slightly on the thick side, but still...
Repeat order. This part has surpassed the durability of an equivalent part machined from billet. Assembly was subjected to 50G shock test and performed flawlessly. Will be ordering more again soon,...
Everything good
GOOD
very good quality
very good quality, good details, strong
1 ... 9 10 11 12 13 14 15 16 17 18 19