I had this solo trackball submitted the same time as my SS Centurion keyboard. Superb PCBA and print. No issues. All PCBs were working. Beautifully done. Will come back to PCBWay for my next project.
Placas realmente profesionales. Pcbway es una empresa fiable, responsable y puntual con sus entregas. Estoy muy conforme con su trabajo y puntualidad.
My board is an art project, and was important that the silk screen, copper, and solder mask were properly aligned. The board came out exactly how I wanted it. I attached a picture, but had to compress...
Perfect quality.
Dual layer PCBs for a custom controller with lipo battery circuitry, buttons, micro SD card, and i/o expander. The boards were well made and look great!
I was completely impressed with their professionalism and customer service. This is actually my second order. And I am very satisfied with the result. I experienced with another pcb manufactured compa...
I have had a pleasant first experience. My project is a single layer PCB for push-in components (non-SMD). Communication has been fast and effective. I received the order in Spain in a very short time...
Basic open source shield for Microdesys ESP32 open source board
Quality in PCBA and PCB print was very good. No scratches and most importantly the RP2040 storage shows up when plugged into the USB C and was able to accept QMK firmware. Very happy with the print an...
A project (not by me) to replace/bypass the WiiU's nand with an SD card should it experience failure. The PCB quality is perfect and of impeccable quality. Highly recommended service.
Evaluation board to check the performance of an 869MHz chip antenna, I didn't provide any specific requirements for the trace impedances but still came back exactly to my specification and was able to...
Assembly: The boards were well assembled with good quality - though there seems to be a short on all the assembled boards which shorts the VBAT to GND and prevents the system from running off of batte...
I designed this board in KiCad as part of a larger open hardware project (https://github.com/rrainey/tempo). I've used PCBWay for many PCB projects but this was my first experience using their PCB A...
Controller for a Nema17 stepper motor that controls a filament rewinder. The basic speed can be set, as well as a limit switch and also with right / left run.
素晴らしい！ありがとうございました。
Thank you PcbWay!