LED driver board
Basic motor controller, using a relay and latching power
Bends were clean and accurate. Anodizing was good. Silkscreen slightly misaligned, but barely noticeable.
MACHINERY TOOLING
MACHINERY TOOLING
MACHINERY TOOLING
PFN capacitor section, good quality 2 layer board delivered quickly.
Bare FR4 board to be used as an insulator, looks good, board thickness was well within the FR4 thickness tolerance range.
Basic relay control board
The Assembly folk at PCBway are awesome. The gamma is an open source miner that uses chips from another miner - so sourcing chips is sometimes difficult. But they have supported my choices, directio...
No problems, essentially exactly as ordered.
MACHINERY TOOLING
MACHINERY TOOLING
Insulating shim, originally designed as a PCB but ended up being a CNC machining job due to Z tolerance restrictions. After some back and forth the requirements of this unusual PCB were understood and...
HV switch stack section, good quality PCB as usual
Quality matched expectations.