Product Description
Pull Wire Plotter Wall Painting Robot (Arduino)
The stepper motor uses 28BYJ, which is small in size, convenient in wiring and simple in procedures. There is no need for drivers, soldering, power supply and other issues, and it can be directly powered by Arduino. The motor and the main board are integrated in a base, and there are winding frames on both sides that can be pasted on the upper corner of any wall or drawing board. Using multiple winding racks can also place the motherboard on the lower side of the screen, without climbing ladders.
- Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
-
Sensor Expansion Board With PH2.0 Port for World of Module(Micro:bit)$8.99 or 1080 BeansRedeem Now
-
-
-
-
Micro:bit expansion board motor steering gear development drive board$19.99 or 2240 BeansRedeem Now
-
Jetbot Mini AI Vision Robot Car ROS Starter Kit(with NVIDIA Jetson Nano 4GB)$299.99 or 36000 BeansRedeem Now
-
-
-
-
-
16 in 1 Building:bit Super kit(Including the Microbit V2 mainboard)$89.99 or 10800 BeansRedeem Now
-
-
-