Description
Mini Digital Power System
MDP (Mini Digital Power System) is a system of programmable linear DC power supply based on modular design, capable of connecting different modules for use as needed.
Current Functional Modules:Display Control Module、Digital Power Module
Modules in Develop:Digital Signal Genetator Module、Electronic Load Module、Power Charger Module、Battery Pack Module
MDP-XP consists of a display control module and a digital power module. Through 2.4G wireless connection, it achieves multichannel free combination at the power of 90W per channel. MDP-XP is a high cost-effective programmable linear DC power supply, featuring indicators, stability, reliability and distinct user interface comparable with professional power supplies; it also provides programmable output, timing output, sequential control, automatic compensation and other powerful functions, so as to meet diversified testing needs.
Display Control Module: equipped with a 2.8-inch TFT screen, it can display the voltage-current waveform in real time, support data statistics, and automatically pair with and control six sub-modules (digital power modules), with dual thumb wheels and 90-degree scrolling user-friendly design.
Digital Power Module: high efficiency linear output, 0.25mV ripple wave, high-speed transient response, and supporting precise fine-tuning.
Product Characteristics:
- 2.4G wireless connection, supporting a Display Control as well as six Digital Powers
- DC wide voltage input between 4.2V and 30V, reduced up to 2.7V after startup
- High-speed transient response and over current protection, as fast as 4uS
- Extremely low load regulation and intelligent line loss compensation
- High efficiency and natural heat dissipation with 90W of capacity load
- Support positive & negative pressure, series pressurization, parallel current sharing, free combination of collaborative load, and intelligent power allocation
- Security Protections: input overvoltage, under-voltage protection, anti-reverse connection protection, anti-backflow protection, overtemperature protection, and over current protection
Introduction:
- MDP-XP consists of a display control module and a digital power module. Through 2.4G wireless connection, it achieves multichannel free combination at the power of 90W per channel;
- MDP-XP is a high cost-effective programmable linear DC power supply, featuring indicators, stability, reliability and distinct user interface comparable with professional power supplies;
- It also provides programmable output, timing output, sequential control, automatic compensation and other powerful functions, so as to meet diversified testing needs;
- Display Control Module: equipped with a 2.8-inch TFT screen, it can display the voltage-current waveform in real time, support data statistics, and automatically pair with and control six sub-modules (digital power modules), with dual thumb wheels and 90-degree scrolling user-friendly design;
- Digital Power Module: high efficiency linear output, 0.25mV ripple wave, high-speed transient response, and supporting precise fine-tuning;
- Automatically shut down and enter micro-power mode;
- Support USB firmware upgrade and user calibration.
Parameter
- Input: DC4.2V-30V (After startup 2.7V), 100mA-6A, Support QC3.0
- Output: 30V / 5A, 90W
- Adjustment Rate: Load Adjustment Rate < ±0.01^%, Power Adjustment Rate < ±0.01^%
- Ripple and Noise: 250uVrms / 3mVpp
- Transient Response Time: ≤4uS
- Line Loss Compensation Range: 5mR - 100mR
- Protection: Input Over-voltage，Under-voltage，Anti-reverse, Output Anti-backflow，Over Temperature
- Data Record: Max Storage: 7MB, Max Recording Time: 24 Hours
Contents:
- MDP-M01 Smart Digital Monitor X 1
- MDP-P905 Digital Power Supply X 1
- Output Cable（4.0mm Banana to Alligator) X 2
- Safety Instructions X 1
