Product Description
5V-12V ZVS Induction Heating Power Supply Modules Tesla Jacob Ladder + Coil xs90
Specification:
- Input voltage: 5v-12v
- Module dimensions:5.5x4x2 cm(LxWxH)
- Product Weight: 119g
- Coil size: length:7.5cm
- Width: 2.8cm
Features:
- ZVS heating power supply module including heating coil
- Input voltage DC5V-12V(We are not guarantee the module will work when the voltage is over 12V or less than 5V)
- Maximum power 120W(when 12V eddy-current heating)
- Ensure all the components welding right,power line connect in right way,than to set up an electric circuit.
- The width of the heated object is as far as possible between the 1/3~1/2 of the inner diameter of the heating coil,the maximum not more than 2/3.
Package List:
- 1 x ZVS heating power supply module
- 1 x Coil
- Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-15%
PCBWay Single-Channel Relay Module with Delayed Power-off, Triggered Delay, and Cyclical Timing Circuit Switch$1.69 or 200 BeansRedeem Now -
-
Four Way Holder V3 Development Board（Compatible with Raspberry Pi/STM32)$8.99 or 1080 BeansRedeem Now -
-50%
1 Channel Relay Module 5V with optocoupler Support High and Low Level Trigger$0.99 or 120 BeansRedeem Now -
Relay Module Interface Boards for Arduino Low Level Trigger 5V 2 Channels$2.00 or 200 BeansRedeem Now -
-
-
LM2596S DC-DC 3A Buck Adjustable Step-down Power Supply Converter Module$0.99 or 120 BeansRedeem Now -
-
-
-
-
USB isolator/USB to USB isolator digital signal audio power isolator ADuM3160$9.99 or 1200 BeansRedeem Now -
-
-
Dual 18650 Battery Holder V3 Development Board（Compatible with Raspberry Pi/STM32)$4.99 or 600 BeansRedeem Now -
18650 Battery Holder V3 Development Board（Compatible with Raspberry Pi/STM32)$3.99 or 480 BeansRedeem Now
