5G dual-band WIFI module 2.4G IoT wireless module low power consumption
Description
HF-LPD100 series low-power embedded Wi-Fi module supports 2.4G and 5G dual frequency, provides a solution to connect the user's physical device to the Wi-Fi wireless network, and provides UART serial port and other interfaces to transmit data. Program. The module hardware integrates MAC, baseband chip, radio frequency transceiver unit, and power amplifier; the embedded firmware supports Wi-Fi protocol and configuration, as well as the network TCP/IP protocol stack. HF-LPD100 is an integrated 801.11 b/g/n Wi-Fi low-power solution. Through the HF-LPD100 module, traditional low-end serial devices or MCU-controlled devices can be easily accessed Wi-Fi wireless network to realize IoT network control and management.
HF-LPD100 adopts the industry's low-power embedded structure, and has been professionally optimized for applications in low-flow and low-frequency data transmission fields such as smart furniture, smart grid, handheld devices, personal medical treatment, and industrial control.
Features
- Support 802.11 a/b/g/n wireless standards, support 2.4GHz and 5GHz dual-frequency operation
- Using Andes Core, the highest frequency is 160MHz, 192KB RAM, 2MB Flash
- Support UART data communication interface
- Support STA/AP/AP+STA working mode
- Support Sniffer packet capture mode SmartLinkV8 distribution network function
- Support SoftAP mode SmartAPLink network distribution function
- Support wireless and remote firmware upgrades, and provide wireless batch configuration tools
- Provide SDK development kit to support secondary development
- Support different types of antenna options
- HF-LPD100: Built-in PCB antenna, external 3rd generation IPEX interface or external pad
- 3.3V single power supply
- FCC/CE/SRRC/RoHS certification (TBD)
Function
Wireless networking：
The wireless module of HF-LPD100 can be configured as a wireless STA or AP.
So HF-LPD100 logically supports 2 wireless interfaces, one is used as STA, the other is equivalent to an AP, and other STAs can communicate point-to-point through the AP of this module. Therefore, the use of HF-LPD100 can provide a very flexible networking mode and network topology.
Description:
AP: The wireless access point is the central node of a wireless network. The commonly used wireless router is an AP, and other wireless terminals can connect to each other through the AP.
STA: a wireless station, a terminal of a wireless network. Such as notebook computers, PDAs, etc.
AP-based wireless networking
This is a basic networking method consisting of an AP and many STAs. The feature is that the AP is at the center, and the mutual communication between the STAs is done through AP forwarding.
STA-based wireless network
The STA interface of the HF-LPD100 module can be connected to the router and connected to the server in the network through a TCP connection.
- Comments(0)
You might like
-
PCBWay Wireless Module with SI24R1 RF Communication Wireless Module for Data Transmission$1.99 or 240 BeansRedeem Now -
-
-
-
-
-
-
-
-
-
-
5G dual-band WIFI module 2.4G IoT wireless module low power consumption$5.00 or 500 BeansRedeem Now
-
ESP-12N ESP8266 Wireless Remote Serial Port WiFi Transmission Module Board$3.00 or 300 BeansRedeem Now -
ESP32 Cam WiFi Bluetooth Module Development Board with OV2640 Camera Module$9.00 or 900 BeansRedeem Now -
-
-
-
5G dual-band WIFI module 2.4G IoT wireless module low power consumption
In Stock
